ian57

Piplay on Vaweshar 3.2" screen + rapi2
I post an answer : http://www.circuitbasics.com/setup-lcd-touchscreen-raspberry-pi/ everything is here.

Comment by ian57 October 2015 permalink
Piplay on Vaweshar 3.2" screen + rapi2
Hi rammis, I've got this type of screen and I cannot get it work. White screen. What is the procedure to get it work. I get error like : [ 3.833362] stmpe-spi spi0.1: unknown chip id: 0x0 [ 3.860204] stmpe-spi: probe of spi0.1 failed wi…

Comment by ian57 October 2015 permalink
Joysticks/buttons not responding in games (maybe xin-mo troubles)
No advance mame is working good with the 2 player xinmo. Check my config file here https://github.com/ian57/Raspicade-configuration-files/blob/master/.advance/advmame.rc-xinmo

Comment by ian57 September 2015 permalink
My build the PICAB
Yep, nice work, very close to pro work.

Comment by ian57 September 2015 permalink
Need a better Front End, ideally Attract mode.
I've installed a minimal xorg server on dietpi, without desktop, compiled attract-mode and ran it successfully. Actually it is quite speedy. I think it's the desktop which slow down the GUI on the pi, not the X server. Need to put some ro…

Comment by ian57 September 2015 permalink
Need a better Front End, ideally Attract mode.
Thanks Locke, I started to build my own SD with diet-pi to test attract-mode. in the link http://forum.attractmode.org/index.php?topic=223.0 the guy uses my raspicade stuff for gpio ;), that's cool.

Comment by ian57 September 2015 permalink
Need a better Front End, ideally Attract mode.
Yes, amazing with rpi1 256Mo... You can confirm it uses X? I will give it a try with the diet-pi distro... I didn't know it before.

Comment by ian57 September 2015 permalink
Need a better Front End, ideally Attract mode.
As far as I know attract needs X11 to run... really a mess no ?

Comment by ian57 August 2015 permalink
error message
SSilver2k2 need to delay a little the splash video to avoid these messages. I had the problem on Raspicade.

Comment by ian57 August 2015 permalink
error message
New kernel.... and video is coming too soon ;)

Comment by ian57 August 2015 permalink
Problem with my joysticks
If it's a xinmo, take a look at raspicade. It supports xinmo natively. Emulators have been patched and configured for this devices.

Comment by ian57 July 2015 permalink
PiFBA 2 players Xin-mo
manual is on the wiki page of raspicade.

Comment by ian57 July 2015 permalink
PiFBA 2 players Xin-mo
same as pifba use my files

Comment by ian57 July 2015 permalink
PiFBA 2 players Xin-mo
Use my patched pifba too ;) from https://github.com/ian57/Raspicade-configuration-files/tree/master/pifba

Comment by ian57 July 2015 permalink
PiFBA 2 players Xin-mo
I'm not sure that the the piplay relaease of pifba is patched for xinmo. If not, event if your start button is working, your second joystick will not work. Take my binary release of pifba and its config file for xinmo here : https://github.co…

Comment by ian57 June 2015 permalink
[Solved] Xin-Mo Speed joystick in game and menu
Of course ;)

Comment by ian57 June 2015 permalink
[Solved] Xin-Mo Speed joystick in game and menu
Its a kernel bug. Piplay does not have full support of xinmo. take a look at http://piplay.org/forum/discussion/1840/another-xin-mo-question-mutliple-button-presses#Item_7 to get and install my patched kernbel from raspicade.

Comment by ian57 June 2015 permalink
Adding Mupen64
You can dl my mupen64 exe from my github https://github.com/ian57/Raspicade-configuration-files/tree/master/mupen64plus and give a try. Or simply give a try to my distro.

Comment by ian57 June 2015 permalink
Adding Mupen64
Mupen is present in Raspicade ;)

Comment by ian57 June 2015 permalink
Another Xin Mo Question (Mutliple Button Presses)
Sorry, check this link instead : https://github.com/ian57/Raspicade-configuration-files/raw/master/kernel/custom_kernel_1.20150407-1.tar.gz

Comment by ian57 June 2015 permalink
Xin-Mo And beta9
You can take the kernel directly from github https://github.com/ian57/Raspicade-configuration-files/tree/master/kernel without creating the sd from the raspi distro wget https://github.com/ian57/Raspicade-configuration-files/raw/master/kernel/custo…

Comment by ian57 June 2015 permalink
Another Xin Mo Question (Mutliple Button Presses)
As said here, http://piplay.org/forum/discussion/1771/xin-mo-and-beta9#Item_5 take my raspicade kernel nel, install it easily with a simple script. reboot and the multi presse button bug is gone away

Comment by ian57 June 2015 permalink
Xin-Mo And beta9
Yes my kernel is patched to fix the xinmo bug...

Comment by ian57 June 2015 permalink
advmame vs mame4all
Pi1 512 B+ -> Mame4all Pi2 -> Advmame

Comment by ian57 June 2015 permalink
Xin-Mo And beta9
If you're french and want a xinmo distro, giva a try to raspicade :)

Comment by ian57 June 2015 permalink
Please Help i think i'am turning into a crazy guy : Xin-mo in 8.3 beta Piplay !
My distro was created for arcade integration... and the native suppport of the xinmo dual player is the main difference with the other distro.

Comment by ian57 May 2015 permalink
ScummVM on Pi2
The SDL 1.2 patches have not been applied to Piplay.... that's the reason of the black screen. There is a post about that here.

Comment by ian57 April 2015 permalink
40-pins GPIO and joysticks
Because exe is already compiled. To make yours : make clean && make will do the job

Comment by ian57 April 2015 permalink
40-pins GPIO and joysticks
Check my github for more details https://github.com/ian57/Raspicade-Retrogame-2Player-Pi2. You ll find what you are searching with a wiring schema in the wiki.

Comment by ian57 April 2015 permalink
Joystick and buttons problem
@fattyphunt : with raspicade and xin-mo I use a combo to exit emulators. I modified sources of some emulators to do that, and configure a combo in retroarch. That works well.

Comment by ian57 April 2015 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: ian57
Joined: April 2014
Visits: 504
Last Active: February 2016
Roles: Member

ian57

Howdy, Stranger!

About

Recommended Accessories