Oldgoat

New user - want to set input configuration for Mame4All to use X-Arcade
Have you configured your controls in PiPlay (press tab on the main Piplay menu, tabe down to the emulator you want to configure, press enter and configure the controls)?

Comment by Oldgoat August 2015 permalink
Issue with Mame4All
I would start by using the database tool to see the command line being executed for a given option. The issue should be obvious.

Comment by Oldgoat August 2015 permalink
GPioneer - A side project compatible with PiPlay
Thanks. One day you'll have to explain the pattern/logic behind the bcm numbering.

Comment by Oldgoat August 2015 permalink
GPioneer - A side project compatible with PiPlay
A couple of general questions. First, I have discovered that the keystroke mapping for one of the pins is a "P" . Turns out that the P key initiates a pause in games. Further, pause does not seem to be a 'mappable' action in M…

Comment by Oldgoat August 2015 permalink
sticky for donations
Sounds good

Comment by Oldgoat May 2015 permalink
sticky for donations
New to this whole thing but I would certainly be open to donating a few $

Comment by Oldgoat May 2015 permalink
TurboGrafx 16 and MAMEBIOS.rar
Actually, I was referring to the number of systems selected (answered Y to) as the possible issue. I assume it is a loop within a loop with two indices at play. However, as I think about it some more, the command would not execute as written and I …

Comment by Oldgoat April 2015 permalink
TurboGrafx 16 and MAMEBIOS.rar
I must have run the ROM Scraper a dozen times. However, ran it as you suggested and it worked perfectly. Thanks. The odd thing is that the Rom Scraper appeared to work. It asked about scraping for the various emulators and appeared to execute. O…

Comment by Oldgoat April 2015 permalink
Super Noob Question, initial PiPlay setup
Trial by fire. Never could get this approach to work properly so I went to plan B. Here is what I ended up doing, in case someone else runs into this Started from scratch reformatting the SD (I used SD Formatter V4.0 with full erase in addition t…

Comment by Oldgoat April 2015 permalink
Super Noob Question, initial PiPlay setup
Well, that didn't take long. There is no images directory on the SD. Also, even though I have a 16GB card, it says that I don't have room to place the files on the SD. Interestingly, when I first booted, I came to a menu to increase pa…

Comment by Oldgoat April 2015 permalink
Super Noob Question, initial PiPlay setup
Ah ha makes sense. (I was kinda wondering what it was doing when it asked me to install on the initial boot; however, thinking of it as the BIOS makes the lightbulb come on....well, at least for now) Thanks!

Comment by Oldgoat April 2015 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Oldgoat
Joined: April 2015
Visits: 39
Last Active: July 2016
Roles: Member

Oldgoat

Howdy, Stranger!

About

Recommended Accessories