This should be added...

edit ~/pimame/emulators/mame4all-pi/roms/mame.cfg and change the "rompath" target to /home/pi/pimame/roms/mame4all


Original post:
http://pimame.org/forum/discussion/1165/0-8b4-mame4all-romset-version#Item_6

Hi:

There is a problem (known problem) that I think it should be solved, and it's about old retro-joystics.

***********
Driver for the Retro-Bit Atari, Nintendo NES, SNES & Sega Genesis joystick controller adapters.

This is a USB to dual-DB9, NES/SNES or Genesis header controller that allows the use of actual compatible joysticks in emulators.

http://www.amazon.com/gp/product/B007ZS35CU/
***********

I have one of these and the up and left axis don't work. After spending hours and reading forums, I think you should add this to the next release of piplay. The solution is:

I don't know whether you are using an official image of raspbian or compiling the kernel yourself. In any case, the usbhid module, responsible for this (check https://github.com/robmcmullen/hid-atari-retrobit) is the problem (well, the problem is actually the adapter, but with a patch it can be fixed).

So, it is necessary to provide a kernel image with the module patched. The steps for this are:

1) configure all the stuff related to HID as Module (make menuconfig), as in the image you are using for the piplay is integrated in the kernel
2) apply this patch to the file drivers/hid/hid-input.c (in the kernel sources)
patch: https://dl.dropboxusercontent.com/u/3088814/hid-input.patch

3) compile the kernel and modules

4) Edit the /boot/cmdline.txt file and add usbhid.quirks=0x1292:0x4154:0x040 to the end of the line of text

Use that image for the piplay version.

The module now will recognized all the movements for the joystick :D

@luisusmc - In the newest version, there is a new theme setting that allows us to set a max width for labels. If it is bigger than the designated width, then it will resize the label. That is probably what you are seeing. If the size difference bothers you, you can either set all of the font smaller by changing ' label_font_size:' or you can just set ' label_max_text_width: None' and it won't resize anything

I believe it's just a matter of convenience for Shea right now. You could always just grab a previous smaller version, then use the updater utility. Don't worry, after he gets all of this kickstarter stuff out of the way, I'm sure he'll be back to packing them in the smaller size.

Also, that's a good idea to list the version. Not sure why it never occured to me. I think that I may add it to the upper left hand corner of the popup menu. Right now, the only way to see the version is to navigate to /home/pi/pimame/ and there is a file called 'version' then you can also check http://pimame.org/version to see the latest updated version

The versioning is just my own internal coding scheme. I should have started at 1, but i decided to start at 8.1. Everytime I do an update I up the version number. Sometimes I push an update and find a bug but haven't released the new sd card image, so i just up the version again.

No one is really supposed to see it.

Now that the Kickstarter is over, I'll be working on the size of the SD Cards. It didn't make sense to have a bunch of different sized SD Card images uploaded everywhere.

Same story here...

Also Controller Setup doesnt appear in the menu either. This is a clean install of 0.8b5 as after I upgraded from 0.8b4 FBA didnt work, kept getting Segmentation errors when I ran games

@Conno123009 Cheers, I set up both Neo Geo and Arcade through the config but FBA still didnt work, I'm going to go back to 0.8b3. That was the last one I had FBA working in.