lsalcedo

PiPlay 0.8.0 Beta 3 now available
can u play marvel vs campcom with 2 joysticks on advmame? it seem its not recognizing some of my p2 inputs.

Comment by lsalcedo April 2014 permalink
PiPlay 0.8.0 Beta 3 now available
i dont even know wheres my advmame folder. never used this before ;p

Comment by lsalcedo April 2014 permalink
PiPlay 0.8.0 Beta 3 now available
1.06 are no ok i think. ive tried with my mame 0.375b and its ok but neogeo roms are not working. ive tried 2 neogeo.zip files. is there anything i can do? i do remember i had to change my mame.cfg on mame4all. is there something similar to run n…

Comment by lsalcedo April 2014 permalink
PiPlay 0.8.0 Beta 3 now available
so i think ill go to AdvMAME too. What's the ROM set u guys using? Ive got MAME 1.06 hope it works..

Comment by lsalcedo April 2014 permalink
PiPlay 0.8.0 Beta 3 now available
i think pins are working the thing is how to config them on emulators like mame4all, snes and fba.

Comment by lsalcedo April 2014 permalink
Custom Table - Help required with accessing snes config file for remapping
yes, im saving :) im not that dumb you need to install jstest to get input values as the cfg file itself says: # Get codes from "jstest /dev/input/js0" # from package "joystick" im not sure if this is the command you can do a q…

Comment by lsalcedo April 2014 permalink
Custom Table - Help required with accessing snes config file for remapping
alright. in my case it seems snes is ignoring my snes9x.cfg. i change the code but things still the same. good luck.

Comment by lsalcedo April 2014 permalink
Custom Table - Help required with accessing snes config file for remapping
could you make everything alright mattju? could u tell me how you did it? i could not make it work :(

Comment by lsalcedo April 2014 permalink
Xin-Mo and pisnes
i think pisnes it ignoring my snes9x.cfg.

Comment by lsalcedo April 2014 permalink
Xin-Mo and pisnes
i could not use my second joystick either. when i press p2's button i get load and save state (weird since I "#") and the axis are off. this is my code. have a look, please. [Joystick] # Get codes from "jstest /dev/input/js0&qu…

Comment by lsalcedo April 2014 permalink
Fire Burn Alpha (FBA) Xin-Mo adapter
are u guys running jtest? i could run it and identify all inputs. so i put them on fba2x.cfg but i still have no luck to play marvel vs campcom with 2 joysticks.

Comment by lsalcedo April 2014 permalink
Fire Burn Alpha (FBA) Xin-Mo adapter
on mame4all i cant config my INSERT COIN button and START for player 2. the rest is just working fine, i just do a start for p2 on keyboard and play. the frontend menu doest recognize these last inputs.. maybe ill need to change it directly on the …

Comment by lsalcedo April 2014 permalink
Fire Burn Alpha (FBA) Xin-Mo adapter
i m having this issues in FBA and this is how my fba2x.cfg looks like: [Keyboard] # Get codes from /usr/include/SDL/SDL_keysym.h A_1=306 B_1=32 X_1=308 Y_1=304 L_1=122 R_1=120 START_1=9999 SELECT_1=9999 LEFT_1=276 RIGHT_1=275 UP_1=27333333 DOWN_1=2…

Comment by lsalcedo April 2014 permalink
Xin-Mo and pisnes
hey human could u config all inputs on mame4ll and fba?

Comment by lsalcedo April 2014 permalink
PiFBA arcade stick LEFT/RIGH/UP/DOWN axis. How change?
anyone could run FBA with player 2 inputs OK?

Comment by lsalcedo April 2014 permalink
PiFBA arcade stick LEFT/RIGH/UP/DOWN axis. How change?
its SELECT

Comment by lsalcedo April 2014 permalink
PiFBA arcade stick LEFT/RIGH/UP/DOWN axis. How change?
im looking for this insert coin too. anyone knows?

Comment by lsalcedo April 2014 permalink
PiPlay 0.8.0 Beta 3 now available
@hinchhinch maybe u need to make a new SD.

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
only buttons 7 and 8 which i would set for p2 coin and start are not being recognized on mame4all.

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
I just tested the new release. I could play a little bit on mame4all and could not set player2 inputs on its interface. When I pressed player2's inputs mame4all didnt recognize it. Ive tested all(p1 & p2) my inputs with these commands and …

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
Thanks Shea, I m dowloading and then ill give you feedback. Happy easter

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
in fact after the patch i could run evtest and confirm that all inputs were OK. but, after a few reboots or one shutdown my pi wouldnt start anymore. its soo instable.

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
Im following this guide but still had no luck. http://ithink.ch/blog/2013/09/08/patching_the_linux_kernel_to_install_the_xin-mo_dual_arcade_driver_on_a_raspberry_pi.html

Comment by lsalcedo April 2014 permalink
Xin-Mo and pisnes
ive been trying to make xin mo to work on pimame 0.8 for the last days but i still have no luck :( iven been following this guide; http://ithink.ch/blog/2013/09/08/patching_the_linux_kernel_to_install_the_xin-mo_dual_arcade_driver_on_a_raspberry_pi…

Comment by lsalcedo April 2014 permalink
Anyone have a working GBA emulator?
probably. place bios and roms there and u should be good to go. gl.

Comment by lsalcedo April 2014 permalink
Issues with enconder - Please Help
Thanks for your answer Shea. I will look after this update and post my thoughts here.

Comment by lsalcedo April 2014 permalink
[SOLVED] Problems getting emulators to run in v0.8
MAME4ALL - OK! FBA - OK! SNES - OK! GBA - OK! GB - OK! Genesis - OK! Atari - OK!

Comment by lsalcedo April 2014 permalink
Anyone have a working GBA emulator?
if im not wrong roms should be placed in emulators/gpsp

Comment by lsalcedo April 2014 permalink
Anyone have a working GBA emulator?
its not freezed! you are running the bios file - press f10. gba's menu is really bad....

Comment by lsalcedo April 2014 permalink
wifi
get yourself edimax :)

Comment by lsalcedo April 2014 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: lsalcedo
Joined: March 2014
Visits: 103
Last Active: December 2015
Roles: Member

lsalcedo

Howdy, Stranger!

About

Recommended Accessories