husar

AdvMame stopped working
Yes, that worked. I am doing another full install again. I am hoping that fixes it.

Comment by husar December 2013 permalink
[SOLVED] Street Fighter Alpha 3 running super slow
Yes, FBA it works great. I have seen a few posts on the XArcade setup. I hope you figure it out.

Comment by husar December 2013 permalink
MiniPac Not Accepting Address
For what it is worth I had no problem connection my iPac2 to my RPi. In my setup I have my iPac2 going to a USB hub and the USB going into the RPi. Does the MiniPac has a light on it? My iPac2 has a light that lets me know it is connected.

Comment by husar December 2013 permalink
[BUILD] The Legocade - My Custom Build
Looks pretty sweet. Can you get pretty tough with the joysticks? The way I son plays some games I'd worry about him tearing it up.

Comment by husar December 2013 permalink
Help with NES/ADVMess
Try TAB while in a game. See if the configuration options come up.

Comment by husar December 2013 permalink
Changing PiMame Main Menu Controls
Look for the mame4all.cfg file. Inside that you can edit or add the following... [frontend] #Keyboard controls for frontend only # Get codes from /usr/include/SDL/SDL_keysym.h K_START=13 K_SELECT=53 K_LEFT=276 K_RIGHT=275 K_UP=273 K_DOWN=2…

Comment by husar December 2013 permalink
Difference between AdvanceMAME and MAME4ALL?
MAME4ALL is a MAME fork that is built for Mobile devices (Phones, Tablets, Portable Linux Consoles etc.) and as such, configuration options are more limited. PiMAME4ALL is a good deal faster (250-300%) than AdvMAME although this is not immediately…

Comment by husar December 2013 permalink
NEO GEO roms color/IO check/Time and date/ settings window
Hey lost. I get this issue too and all my neogeo work. There was a way that I ended up being able to close that window so let me go back tonight and play with it agian. What arcade controls do you have connected to your system?

Comment by husar December 2013 permalink
How to enable trackball?
blnk, the Happ 3'' USB trackball, Happ USB spinner, and touch pad on my bluetooth keyboard all work in in Raspbain. No issues at all.

Comment by husar December 2013 permalink
Getting a 403 forbidden message when creating a new post
I was getting this but only on my iOS devices.

Comment by husar December 2013 permalink
How to enable trackball?
Correction, my happ trackball is USB so it doesn't have any connection to the iPac board. I also have a spinner that is USB. Neither work inside mame games right now. I also looked in the mame.cfg and there is no 'mouse' entry to en…

Comment by husar December 2013 permalink
USB Audio Card w/ PiMAME. Bad!
When I enable USB audio nothing loads for mam4all or FBA in PiMAME. If I disable the usb audio all works fine. I hope to do more testing tonight.

Comment by husar December 2013 permalink
Saving rom settings not saving
Saving now but not sure what changed.

Comment by husar November 2013 permalink
PiFBA in PiMAME - Convinced it doesn't work
Well, after many, many attempts to get fba going I think I finally figured it out. Some how instead of login directories for fba and a few other emulators they were changed to actual directories. Pretty sure this was my issue. Instead of trying t…

Comment by husar November 2013 permalink
Arcade Controls w/ ipac
Okay, figured this out. I seem to be able to map everything now if I use the F1 option after launching a rom in MAME.

Comment by husar November 2013 permalink
PiFBA in PiMAME - Convinced it doesn't work
I just downloaded roms from the source and same thing. Nothing shows up in fba for me. What file tells PiMAME where to get the FBA roms from? Maybe that is not correct.

Comment by husar November 2013 permalink
Rotating Games for rotating monitor
See the FAQ. It has instructions. But you have to have it one way or the other from what I understand.

Comment by husar November 2013 permalink
Design Preview - New Menu System for PiMAME
Is the above menu released yet?

Comment by husar November 2013 permalink
Sound Issues - Metal Slug Series (MAME)
Bjo88, what needs to be done to use the PiFBA? Anything addition to install? Where do the roms go? Thanks.

Comment by husar November 2013 permalink
Run PiMAME from Terminal?
Nice, thank you.

Comment by husar November 2013 permalink
[BUILD] PiMAME Arcade Coffee Table
Looks nice and clean. Great build.

Comment by husar November 2013 permalink
Sound Issues - Metal Slug Series (MAME)
I still cannot get GNGeo working at all. I can't even get any game to show up when it is launched. I posted questions in my other post that no answers. Can you post what the directory strucuture looks like for GNGeo?

Comment by husar November 2013 permalink
General Questions
Could anyone post a screen shot of their gneogeo directory? Still looking for the correct place for the roms.

Comment by husar November 2013 permalink
General Questions
The full structure of my /pi/roms/gneogeo is as follows... gneogeo -bin -roms -share --gngeo --man I tried putting the roms in gngeo and no roms are found.

Comment by husar November 2013 permalink
General Questions
Okay, this doesn't seem to be working. Here is what I have tried. I have a folder called gneogeo but not gngeo. Under my gneogeo I have bin, roms, share folders. If I put my smslug.zip and neogeo.zip in the gneogeo/roms folder no games are …

Comment by husar November 2013 permalink
Booting to MAME4all
I've been looking at this ability. Here is what I was able to find with the search. Let me know if this works. -------- In .profile, you should see a line like this: python /home/pi/pimame_files/menu.py If you want to just run Advance MAME,…

Comment by husar November 2013 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: husar
Joined: November 2013
Visits: 29
Last Active: August 2014
Roles: Member

husar

Howdy, Stranger!

About

Recommended Accessories