rob3662

Arcade/FBA button config incorrect
I just switch the mp and hp when I am using the configuration tool, but roundhouse does work on mine.

Comment by rob3662 August 2015 permalink
GBA controller setup - Why isn't there one?
Just an update. To get my keys to save I had to use the "Exit gpsp" option in the configuration menu after setting up my inputs.

Comment by rob3662 July 2015 permalink
GBA controller setup - Why isn't there one?
I followed the instructions above by mkcroce and I can now assign my keys but they don't save on exit. Is there a way to get them to save?

Comment by rob3662 July 2015 permalink
Remove unwanted simulator
You do this from the web frontend on the 8beta9. Log on to you pi from another computer. Along the top are some tabs, click on "database admin". Then on the left should be a tab called "menu items". In there will be a list of all…

Comment by rob3662 July 2015 permalink
GPioneer - A side project compatible with PiPlay
I got a chance to try switching ESC to a single button and I couldn't get it to freeze. I also set some other buttons up as combos(tab and p) and it caused the same problem. If there is anything else you want me to try let me know.

Comment by rob3662 July 2015 permalink
GPioneer - A side project compatible with PiPlay
It was on a fresh install before I put retrogame on there. The pins are 11 and 12. I will install it again later today and try to assign it to a single key and I will let you know. It will probably be in another 5 or 6 hours.

Comment by rob3662 July 2015 permalink
GPioneer - A side project compatible with PiPlay
I tried out GPioneer but I am having trouble with it. The configuration is easy but something is causing my Pi to freeze. I am running 0.8 beta 9. It seems to be very repeatable on my setup. I had ESC mapped as a combo of my coin button and button 1…

Comment by rob3662 July 2015 permalink
Bug Report: Arcade Controller Setup
FBA Sorry for taking so long, I was gone out for the night

Comment by rob3662 January 2015 permalink
NES Black screen 8.0.7
update** it seems that the combination of ALT + SPACE causes a problem in other emulators, simple solution is to change your inputs. Also, you can comment out the first three lines in the autostart file to stop the desktop from loading, but only do…

Comment by rob3662 January 2015 permalink
NES Black screen 8.0.7
Also, it seems that you can't use leftalt as an input, I had to use the center and right button on the bottom row of my control pad which correspond to Z and X. super mario 3 here I come :)

Comment by rob3662 January 2015 permalink
NES Black screen 8.0.7
I have it working on mine now, here is what I had to do open the raspi-config and tell your Pi to boot to the desktop open .profile sudo /home/pi/.profile comment out the last section of the file from the "if" to the "…

Comment by rob3662 January 2015 permalink
NES Black screen 8.0.7
I am also having this problem, I have tried forcing hdmi and setting the resolution but NES is not working for me. It does work if I exit PiPlay, start x and then restart PiPlay. Is there a way to stop PiPlay from loading and then boot to desktop?

Comment by rob3662 January 2015 permalink
Portable Arcade Build
I have another update on my build thread http://www.buildyourtools.com/phpBB3/viewtopic.php?f=8&t=4356&p=21708#p21708

Comment by rob3662 January 2015 permalink
Portable Arcade Build
Well I decided to use a version of retrogame that mholgatem customized to map my esc, tab, p, and enter buttons to combo buttons. This works out nice because I will now use the extra buttons to turn on my speakers, adjust the volume, and as a reset …

Comment by rob3662 January 2015 permalink
Portable Arcade Build
I sent you a message I am going to try and check my wiring tonight to see if anything broke or if the button is malfunctioning or if a strand of wire fell on the board and shorted something out. **Edit it looks like it is in my wiring or the butto…

Comment by rob3662 January 2015 permalink
Portable Arcade Build
I am using a Model B, I added the p5 header which has esc, enter, p, and tab wired to it. What gets me is that it was working fine for a few days. I will send you my retrogame code that I am using when I get home from work in a few hours.

Comment by rob3662 January 2015 permalink
0.8b5 NES emulation don't work properly
Has anyone found a fix to this besides loading X then running piplay? I am trying to finish setting up my portable arcade and would like to have nes working.

Comment by rob3662 January 2015 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: rob3662
Joined: August 2013
Visits: 39
Last Active: December 2016
Roles: Member

rob3662

Howdy, Stranger!

About

Recommended Accessories