Hello,

I am having some weird issues on 2 different SD cards built from same image (piplay-0.8-beta9) with the same PI2 hardware. I was having issues on the first card so built a second one and have different issues. Summary below.

Card #1 (32 GB)
- Built off of image last week
- HDMI works both audio and video on TV
_ DVI video works OK but NO audio out of 3.5 mm port (for menu, aplay, NES and ADVMAME)
- ADVMAME works with a few ROMS
- NES works with a few ROMS
- Upon startup I get a complete verbose listing of the linux startup commands
- Wifi dongle starts up automatically

Card #2 (8GB)
- Built off of same exact image file as card #1 last night
- HDMI works both audio and video on TV
_ DVI video works OK and audio out of 3.5 mm port works OK (for menu and NES)
- ADVMAME does NOT work with the same ROMs that I used on card #1, choose ROM and it just returns to menu after a few seconds
- NES works with a few ROMS
- Upon startup I get a very short listing of the linux startup commands, and get a PiPlay motion video until menu is ready (is this a clue???)
- Wifi dongle does NOT start up automatically, need to pull the dongle and replace it after startup and all is good.

So I basically have one card where ADVMAME works with NO audio from 3.5mm port, and a second card where audio works out of 3.5mm port but ADVMAME does not work.

I copied the config.txt file from the boot directory from each card and they are the same. I am thinking this is a versioning issue of either piplay or of raspbian but can't figure out the difference. I tried to force audio to 3.5mm plug when on card #1 to 3.5 mm port through command line and also through raspi-config with no luck. (sudo amixer cset numid=3 1) And also placed (hdmi_ignore_edid_audio=1) in the config.txt file with no luck.

Is there a way to get a dump of all package versions that I can diff?

Any help is appreciated.

Thanks,
Pupule