Thanks you!
  • Xenendor
    We did our Pi-mame Cabinet!
    http://postimg.org/image/ji799kxbp/

    But we got one problem.
    We made a button to start the power behind the cabinet, but Raspberry Pi doesn't start, it seems that is turned on because the LED of Raspberry pi start with Red and Green color, but the monitor doesn't recognizes it, and nothing happen.
    To Resolve it i have to connect and reconnect the power cord of Raspberry Pi everytime i power the cabinet,
    Any solution?

    Sorry my english is not so good :D
  • mholgatemmholgatem
    I'm guessing that this is a hotplug problem. Try this: 

    sudo nano /boot/config.txt
    uncomment the line that reads:
     hdmi_force_hotplug=1
    Save, quit, restart pi to load changes. Hopefully this works for you!
  • Xenendor
    Did it, and no solved :(

    So thats not the problem :(
  • ian57ian57
    Perhaps it comes from the SD card. Did you try to remake it. Are all the partitions visible with linux. I often had this problem. The sd connector of the raspberry pi is not very good.
  • Xenendor
    No, i forgot to Save after it ahahah
    Sorry guys,
    I solved with mholgatem comment,
    Thanks you :)
Add a Comment

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Categories

Recommended Accessories